Screen Adapter Installation - Suzuki V-Strom 650

The first step is to remove the bike's screen.


Check the four rubber well-nuts remain in their locations.

Mount the bracket assemblies as shown, using the new hardware provided.


Before tightening the fasteners, check each set of brackets are parallel to each other.


Please note: the picture above shows the optional 'tool-less' adjusters.

With the brackets mounted, install the screen using the new hardware provided.


Take care to ensure that the rubber washers are installed between the screen and the brackets.


Do not overtighten the screen fasteners as this will cause stress which could lead to cracking - only tighten enough to lightly compress the rubber washers.


Installation is now complete.


Take care whilst riding to familiarise yourself with the bike's new characteristics and do not attempt to make adjustments whilst riding.